User's Manual

User Manual VC-EVCC
© 2021 Vector Informatik GmbH Version 1.3.0 207
5.5.9.2 Charge Error Detection
The VC-EVCC provides a charge error detection. Therefore, the following Diagnostic
Trouble Codes (DTC) are used to indicate missing information or invalid conditions which
are needed for charging.
J1939 Vehicle CAN (CAN1) errors:
VCVCCU_ChargeFromVehicle E2E fault (0x20E0EA)
Note
Timeout duration is five times the message cycle time.
Charging Stop Switch (DIN) errors:
DIN ShortToBat error (DTC 0x04E0E3)
PTC0 errors:
PTC0 OutOfRange error (DTC 0x05E0E2)
PTC0 ShortToBat error (DTC 0x05E0E3)
PTC0 ShortToGnd error (DTC 0x05E0E4)
PTC0 OpenLoad error (DTC 0x05E0E5)
Control Pilot errors:
Control Pilot ShortToBat error (DTC 0x00E0E3)
Position Feedback errors:
POS_FB ShortToBat error (DTC 0x02E0E3)
POS_FB ShortToGnd error (DTC 0x02E0E4)
POS_FB OpenLoad error (DTC 0x02E0E5)
Hardware Compatibility error:
Hardware Software Incompatibility error (DTC 0x40E0E2)
LIN Timeout errors:
VCVCCU_LIN_EvMaxMinCurrents Timeout (DTC 0x41E0E2)
VCVCCU_LIN_EvMaxVoltageList Timeout (DTC 0x42E0E2)
VCVCCU_LIN_EvMinVoltageList Timeout (DTC 0x43E0E2)
VCVCCU_LIN_EvPresentCurrentList Timeout (DTC 0x44E0E2)
VCVCCU_LIN_EvStatus Timeout (DTC 0x45E0E2)