User's Manual

User Manual VC-EVCC
© 2021 Vector Informatik GmbH Version 1.3.0 202
5.5.8.22.1 DC_EVStatus Request Parameter
The PowerDeliveryReq(FALSE) is filled with the content of the received CAN signals
according to the table below.
PowerDeliveryReq(FALSE)
CAN signal
DC_EVChargeParameter.DC_EVStatus.
EVReady
VCVCCU_V2G_EVReady
DC_EVChargeParameter.DC_EVStatus.
EVErrorCode
VCVCCU_V2G_EVErrorCode
DC_EVChargeParameter.DC_EVStatus.
EVRESSSOC
VCVCCU_V2G_EVRESSSOC
Table 5-63 PowerDeliveryReq(FALSE) CAN Signal Mapping
5.5.8.22.2 Common Request Parameter
The PowerDeliveryReq(FALSE) uses DC_EVPowerDeliveryParameter.ChargingComplete
and fill with the VCVCCU_V2G_ChargingComplete CAN signal.
The PowerDeliveryReq(FALSE) uses
DC_EVPowerDeliveryParameter.BulkChargingComplete and fills with the
VCVCCU_V2G_BulkChargingComplete CAN signal if
VCVCCU_V2G_BulkChargingCompleteFlag is 1.
5.5.8.22.3 DIN 70121 Request Parameter
The PowerDeliveryReq(FALSE) sets ReadyToChargeState to FALSE.
5.5.8.22.4 ISO 15118 Request Parameter
The PowerDeliveryReq(FALSE) sets ChargeProgress to “Stop”.
The PowerDeliveryReq(FALSE) sets SAScheduleTupleID to the first (in the list) received
SAScheduleTupleID in the ChargeParameterDiscoveryRes.
5.5.8.22.5 DC_EVSEStatus Response Parameter
The CAN signals are filled with the parameters of the PowerDeliveryRes(FALSE) according
to the table below.
PowerDeliveryRes(FALSE)
CAN signal
DC_EVSEChargeParameter.DC_EVSEStatus.
EVSENotification
VCVCCU_V2G_EVSENotification
DC_EVSEChargeParameter.DC_EVSEStatus.NotificationMa
xDelay
VCVCCU_V2G_NotificationMaxD
elay
DC_EVSEChargeParameter.DC_EVSEStatus.DC_EVSEStat
usCode
VCVCCU_V2G_EVSEStatusCod
e
Table 5-64 PowerDeliveryRes(FALSE) CAN Signal Mapping
If the PowerDeliveryRes(FALSE) contains
DC_EVSEChargeParameter.DC_EVSEStatus.EVSEIsolationStatus the VC-EVCC
 sets the value in the CAN signal VCVCCU_V2G_EVSEIsolationStatus and