User's Manual

User Manual VC-EVCC

 One of the following conditions concerning the contract certificate applies and

> No contract certificate is installed

> Invalid contract certificate is installed

> Currently installed contract certificate is within 1 day of expiry

 SECC offered a service in the ServiceList of ServiceDiscoveryResponse as specified

below:

> ServiceID: 2

> FreeService: TRUE

5.5.8.10 PaymentServiceSelection (ISO) / ServicePaymentSelection (DIN)

The VC-EVCC supports “ExternalPayment” as well as “Contract” (Plug and Charge) as

selected payment options.

5.5.8.10.1 Common Request Parameter

The VC-EVCC replies with “ExternalPayment” within the ServicePaymentSelectionReq

SelectedPaymentOption if Plug and Charge is deactivated. If Plug and Charge is activated

the VC-EVCC replies with “Contract” as SelectedPaymentOption.

In the ServicePaymentSelectionReq the ServiceID of the received Charging Service listed

in the ServiceDiscoveryRes is used.

5.5.8.10.2 ISO 15118 Request Parameter

The following Services are added to the SelectedServiceList if the corresponding feature is

activated.

If VAS are supported by the EVSE, the PaymentServiceSelectionReq adds the Value Added

Service as a SelectedService to the SelectedServiceList as described below:

 ServiceID: 3

 ParameterSetID: 4

If contract installation is supported by the EVSE, the PaymentServiceSelectionReq adds

contract installation as a SelectedService to the SelectedServiceList as described below:

 ServiceID: 2

 ParameterSetID: 1

If contract update is supported by the EVSE, the PaymentServiceSelectionReq adds

contract update as a SelectedService to the SelectedServiceList as described below:

 ServiceID: 2

 ParameterSetID: 2

5.5.8.11 Certificate Installation

The VC-EVCC proceeds with the CertificateInstallationReq if

 Charging protocol is ISO 15118

 ServicePaymentSelectionRes/ PaymentServiceSelectionRes has been received