User's Manual

User Manual VC-EVCC

3 System Architecture

The VC-EVCC is designed to be integrated into the vehicle with the following system

architecture. The VC-EVCC supports either the combined charging system (CCS) combo 1

or combo 2 inlets according to the charging standards [10] and [4]. The supported charging

standard is configurable via software.

Figure 3-1 System Overview

3.1 Supported Peripherals

The supported peripherals for inlet charging depend on the charging standard:

> Charging standard CCS-1 (Combo 1 Inlet):

> Phoenix CCS Type 1 Inlet EV-T1GBIE12-1AC series (inlet w. lock)

> Phoenix CHARX T1HBI12 series (inlet w. lock) with restrictions (see Caution

note)

> Charging standard CCS-2 (Combo 2 Inlet):

> Amphenol HVCO-CF6-ATR8-SF series (inlet) & C-NEVDC12V_ELOCK (lock)

> Phoenix CCS Type 2 Inlet EV-T2GBIE12-1AC series (inlet w. lock)

> Phoenix CCS Type 2 Inlet EV-T2GBIE12-3AC series (inlet w. lock)

> Phoenix CHARX T2HBI12 series (inlet w. lock) with restrictions (see Caution

note)

> REMA REV-2C series (inlet) & REMA CCS Actuator (lock)