User's Manual

User Manual VC-EVCC

Inlet_OverloadTimeoutTime

The VC-EVCC time to pause the movement to protect

the inlet motor against over heating

Inlet_OverloadProtection

The Status of the overload protection of the plug motor

Inlet_MaxMovementTime

The maximum time to activate the motor for movement

Table 5-33 Plug Locking Signals

Parameter

Value

Inlet_MaxMovementTime

600ms (default)

Inlet_OverloadTimeoutTime

2650ms (default)

Inlet_UnlockedTime

5000ms

Table 5-34 Plug Locking Parameters

Note

The parameters “Inlet_MaxMovementTime” and “Inlet_OverloadTimeoutTime” are

configurable via UDS. For more information please refer to the chapter “UDS

communication”.

Functionality

The VC-EVCC sets the state of the signal VCVCCU_Inlet_MotorStatus according to the

following table.

VCVCCU_POSFeedback_Voltage

VCVCCU_Inlet_MotorStatus

480mV – 680mV and no latch movement

Unlocked

480mV – 680mV or 2510mV – 3210mV and

latch movement is ongoing

Moving

2510mV – 3210mV and no latch movement

Locked

Error or out of valid voltage range

Error

Table 5-35 Inlet Locking Interpretation