User's Manual

User Manual VC-EVCC

Manual Reading

Reading the VC-EVCC software version information is also possible without CANoe. In

this case, the following CAN Messages (UDS/ TP) must be send on the diagnostic CAN

(CAN0) manually:

CAN-Identifier:

Tester --> VC-EVCC, Request: 0x610

VC-EVCC --> Tester, Response: 0x612

Tester --> Functional: 0x614

1. Read Software Version Information:

Request: 03 22 F1 95 FF FF FF FF

Response: 06 62 F1 95 XX XX XX FF, e.g. 06 62 F1 95 08 00 00 FF

The “VC-EVCC Software Version Information” is included in 3 bytes (Major.Minor.Patch).

Accordingly, the above example shows software version 8.0.0.

Note

In some cases the response message might include the value “AA” instead of “FF”.