User's Manual
User Manual VC-EVCC
© 2021 Vector Informatik GmbH Version 1.3.0 13
1.3.4 Canada: Applied Regulations & Restrictions of Use
ISED Conformity (ICES-003)
This section is solely valid for evaluation-devices “ VC-EVCC Evaluation”.
This ECU represents a Category II equipment and therefore is exempt from certification and
registration. To represent Vector´s Supplier's Declaration of Conformity (SDoC) with ISED
requirements the ISED compliance label is placed on each unit of this device.
Due to the compliance with the regulatory requirements mentioned above the device bears
the following required ISED compliance label:
Figure 1-5 ISED Compliance Label on Product Label
1.4 Warranty
We reserve the right to modify the contents of the documentation or the software without
notice. Vector disclaims all liabilities for the completeness or correctness of the contents and
for damages which may result from the use of this documentation.
1.5 Open-Source Software
No open-source software used.
1.6 Product Designations, Trademarks and Industrial Property Rights
All product designations and/or trademarks mentioned in this manual, which may be
protected by third-party property rights, are subject to the regulations of the applicable
trademark law and/or the property rights of the respective owner.
1.7 Safety Instructions and Hazard Warnings
Caution
Please take into account the following safety instructions and hazard warnings prior to
installation and use of this ECU to avoid personal injuries and damage of property.
Keep this documentation always near the ECU and retain this information for future
reference.