User's Manual
User Manual VC-EVCC
© 2021 Vector Informatik GmbH Version 1.3.0 10
Note
Restrictions due to Product Compliance Reasons
This restriction is solely valid for evaluation-devices “VC-EVCC Evaluation”.
The length of cables connected to the following pins is restricted to a maximal
length of 3m:
LED0, LED1, LED2, LED_GND, VCC_SS, SS_GND, DIN, DIN_GND, HS_OUT0,
HS_OUT1, HS_OUT2, HS_OUT4 (see Chapter 10.1).
The usage of the fitting wiring harness provided by Vector or a wiring harness with
comparable technical properties is strongly recommended.
Note
The CE/ UKCA certification tests were conducted according to the standard
EN 61326-1:2013
The standard was applied as follows:
- Emission: Class B*, Group 1**
- Immunity: Controlled Electromagnetic Environment***
* Class B product: Suitable for use in domestic establishments and in
establishments directly connected to a low voltage power supply network which
supplies buildings used for domestic purposes.
** Group 1 product: Product in which there is intentionally generated and/or used
conductively coupled radio-frequency energy which is necessary for the internal
functioning of the equipment itself.
*** Immunity test requirements for equipment intended to be used in a controlled
electromagnetic environment.