Datasheet

Foshan Vanson Electronics Co., Ltd.
168, Industrial Development Zone, Shitou Chun, Lanshi Zhen, Foshan, Guangdong, CHINA
TEL: [phone] FAX: [phone] E-mail: [e-mail]
1. MODEL: 36CS08FN-M50BD
Outer Diameter 36
φ
mm Face side Dimension 32
φ
mm
Baffle Opening 32.5
φ
mm
2 Dimension & Weight
Height Refer to drawing Weight 8.0Grams
3 Magnet Materials Rare Earth Size
φ
11 ×1.5 mm
4. Nominal Impedance 8 Ω ± 15 %, At 1000 Hz.
Normal 0.5 Watts Maximum 1.0 Watts Sine Wave.5. Power Rating
Normal Watts Maximum Watts Square
6. Resonant Frequency 550 ± 20 % Hz.
84 ± 2 db/ 0.5 Watt
.
0.5 Meter
7. Output Sound Pressure
Level (S.P.L.)
Average at 800, 1000, 1200, 1500 Hz.
8. Frequency Range 300
~
5000 Hz. Average SPL − 10 db.
9. Distortion 5 % Maximum At 1000 Hz. 0.5 W.
10 Abnormal Sound test Must be Normal Tested By 2.0 Volts. Sine Wave.
11 Load Test White Noise 2.0 Volts. (RMS.) 96 Hours.
12 Polarity Diaphragm shall move Forward while Apply a Positive DC Signal to the " +
" or " Marked " Terminal.
Above Measuring condition under temperature : 25~35℃ R.H. 25 ~75%. According to standard
GB/T9396-1996
Mechanical and vibration test
13 High Temperature + 60 ± 2 °C Humidity Random for 96 Hours. (GB2423.2-81)
14 Low Temperature − 25 ± 2 °C Humidity Random for 96 Hours. (GB2423.1-81)
15 Humidity
+ 40 ± 2 °C Relative Humidity (RH) 90 ∼ 95 % 96 Hours.
16 Vibration Frequency 30 ± 15 Hz, Amplitude 1.5 mm for 3 Hours. (GB11606.8-89)
17 Drop test 75 CM free falling on Concrete floor, 10 times. (GB2423. 8-81)
After test leave speakers at room temperature for 1 hour, SPL shall not deviate by ± 3 db from pre-test
18 Temperature Cycle test − 25 ∼ + 60 °C 4 Cycles Temperature test. (GB5170.18-87)
After test leave speakers at room temperature for 1 hour, SPL shall not deviate by ± 4 db from pre-test
Measurement, and meet above spec. item 6. 7. 8. 9. 10.
Please refer to next pages for more detailed testing method.
F: \SPEC\THIN\36CF\36CS08FN-50BD.DWG