LMS3200 User Guide Version A
WaveRider Communications Inc. Software License Agreement This is a legal agreement between you (either an individual or an entity) and WaveRider Communications Inc. for the use of WaveRider computer software, hereinafter the “LICENSED SOFTWARE”. By using the LICENSED SOFTWARE installed in this product, you acknowledge that you have read this license agreement, understand it, and agree to be bound by its terms.
The following are trademarks or registered trademarks of their respective companies or organizations: Microsoft Windows NT 4.0 Workstation (with Service Pack 6a), Microsoft Access, Microsoft SQL Server, Microsoft SQL Agent / Microsoft Corporation Vircom VOP Radius Server / Vircom Inc. Castlerock SNMPc Server / Castle Rock Computing Tardis Timeserver / H.C. Mingham-Smith Ltd.
Warranty In the following warranty text, “WaveRider®” shall mean WaveRider Communications Inc. This WaveRider product is warranted against defects in material and workmanship for a period of one (1) year from the date of purchase. During this warranty period WaveRider will, at its option, either repair or replace products that prove to be defective. For warranty service or repair, the product must be returned to a service facility designated by WaveRider.
Contents 1 Understanding the LMS3200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 1.2 1.3 1.4 1.5 2 2.2 3.3 Starting the NMS Workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Understanding Records Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2.1 LMS3200 Branch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2.2 Inventory Branch . . . .
Configuring a CCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 6.1 6.2 6.3 6.4 6.5 7 Assigning a Password to a CCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configuring the Ethernet and Radio Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2.1 Assigning a CCU ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2.2 Adding EUMs to the CCU Record . . . . .
9.5 Restoring Backed-up Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 10 Monitoring Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 10.1 Monitoring EUM and CCU Operations from the NMS Software . . . . . . . . . . . . . 10.1.1 Network Interface Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.1.2 IP Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14.4.6 Establishing a Serial Port Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 152 15 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 15.1 Common Problems and Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 Appendix A Device Configuration Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 Appendix B Operating Channel Frequencies . . . . . . . . .
Figures Figure 1 NAP Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Figure 2 CAP Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Figure 3 End User Modem (EUM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Figure 4 LMS3200 System Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Figure 5 System Data Flow . . . . .
6 Figure 34 Channel Unit Properties—Tools Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Figure 35 Add Unit Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Figure 36 Channel Unit Properties—IP Routing Tab . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Figure 37 Add Network Routes Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Figure 38 Channel Unit Properties—SNMP/RADIUS Tab . . . . . .
Figure 72 End User Modem Properties—IP Statistics . . . . . . . . . . . . . . . . . . . . . . . 111 Figure 73 Channel Unit Properties—Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Figure 74 End User Modem Properties—Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . 113 Figure 75 SNMPc Main Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 Figure 76 NMS Reports & Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . .
— This page is intentionally left blank —
Tables Table 1 NMS Workstation Default User Names and Passwords . . . . . . . . . . . . . . . 16 Table 2 Icon Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Table 3 Radio Packet Error Rate Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Table 4 Network Interface Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Table 5 IP Statistics . . . . . . . . . . . . . . . . . . . . . .
— This page is intentionally left blank —
Preface About this Manual WaveRider recommends that you read the following sections before you install and operate the LMS3200: • Software License Agreement on page 2 • Warranty on page 4 • Warnings and Advisories on page 12 • Regulatory Notices on page 11 NOTE: The information contained in this manual is subject to change without notice. Regulatory Notices Industry Canada Operators must be familiar with IC RSS-210 and RSS-102.
WARNING! Operators must be familiar with the requirements of the FCC Part 15 Regulations prior to operating any link using this equipment. For installations outside the United States, contact local authorities for applicable regulations.
WARNING! This system must be professionally installed. Antennas and associated transmission cable must be installed by qualified personnel. WaveRider assumes no liability for failure to adhere to this recommendation or to recognized general safety precautions. WARNING! Do not operate the LMS3200 CCU or EUM without connecting a 50-ohm termination to the antenna port. This termination can be a 50-ohm antenna or a 50-ohm resistive load capable of absorbing the full RF output power of the transceiver.
Customer Support If you have any problems with the hardware or software, please contact WaveRider Communications Inc. Telephone: +1 416–502–3161 Fax: +1 416–502–2968 Email: URL: techsupport@waverider.com www.waverider.com WaveRider offers a complete training program. Please contact your sales representative for training information.
1 Understanding the LMS3200 The LMS3200 system consists of three main components: 1.1 • Network Access Point (NAP) • Communications Access Point (CAP) • End User Modem (EUM) NAP The NAP acts as a gateway to the Internet. It is the connection point between the LMS3200 wireless network and the rest of the world. Information passes from the subscriber’s PC or network through the LMS3200 network to the Internet.
1 Understanding the LMS3200 Figure 1 NAP Cabinet Data Entry Panel Ethernet Switch Router NAP UPS The NAP equipment includes the following components: • data-entry panel • Ethernet switch • router • uninterruptible power supply (UPS) • NMS workstation The data entry panel, switch, router, and UPS are enclosed within a free-standing equipment cabinet. The NMS workstation is located near the cabinet and is connected to it by an Ethernet network cable.
1 Understanding the LMS3200 1.2 CAP The CAP serves a routing function for the LMS3200 data communication by providing a collection point for the EUM data, and translating this data to a single data stream. It also acts as a distribution point for data received from the NAP by translating the data from a single data stream into multiple radio signals. This information then transmits to the appropriate EUMs.
1 Understanding the LMS3200 1.3 EUMs The EUM is a self-contained wireless router that connects directly to a subscriber’s network or computer. The EUM provides raw data of up to 2.75 Mbps between the EUM and a CCU using wireless IP routing to create direct high-speed Internet access gateway to and from a local area network (LAN).
1 Understanding the LMS3200 1.4 Network Configuration LMS3200 System Components on page 5 shows the connections between the components of the LMS3200 system, the Internet, and the customer’s PC or network.
1 Understanding the LMS3200 1.5 Data Flow From the simplest perspective, the LMS3200 system consists of the NAP, CAP, and EUM. The communications between these devices is controlled by routers. The NAP contains a router, the CAP contains a CCU, which is essentially a router, and the EUM, which also acts as a router. Each router has two (or more) connections on it. • The NAP router connects to the WISP (WAN) and the CCU in the CAP (LAN).
2 Installing the NAP and the CAP The first step in setting up your LMS3200 network is to link the NAP to the CAP. WaveRider recommends that you set up the NAP and CAP using the default settings initially. After the network is operational, you can optionally change the network addresses to suit your needs using the LMS Network Management System (NMS) software. The basic procedure for setting up the LMS3200 system, including the CAP to NAP link, is as follows: 1. Set up the CAP. 2.
2 Installing the NAP and the CAP 2.1 Setting up the CAP Using the Default Configuration The CAP is the first component that you should set up.
2 Installing the NAP and the CAP To set up the CAP with the default configuration, use the steps described below: 1. Ensure that your CAP site has been prepared to support the CAP requirements, including CCU antenna structures, power, grounding, and lightning protection. WARNING! This system must be professionally installed. Antennas and associated transmission cable must be installed by qualified personnel.
2 Installing the NAP and the CAP To Reconnect the UPS Battery 1. Open or remove the front and rear doors on the cabinet. 2. Pull the front cover off the UPS to expose the battery connection. Figure 7 battery bank plug Exide 5119 UPS with Battery Disconnected UPS receptacle 3. To reconnect the battery, plug the battery bank plug into the UPS receptacle. Figure 8 Exide 5119 UPS with Battery Connected Push the connectors behind the handle and replace the front cover 4.
2 Installing the NAP and the CAP 2.1.2 Setting up your Backhaul Equipment The type of backhaul equipment for your site depends on the following conditions: • expected traffic load • available backhaul infrastructure • distance between the CAP and the NAP The backhaul can be either a wired connection to the NAP or a connection through an external unit that provides a transparent connection at the Ethernet Layer 2 transport.
2 Installing the NAP and the CAP 2.2 Setting up the NAP Using the Default Configuration After you have set up the CAP, the next step is to set up the NAP.
2 Installing the NAP and the CAP Use the following procedure to set up a NAP: 1. Ensure that your NAP site has been prepared to support the NAP requirements, including power, grounding, and lightning protection. 2. Reconnect the Exide 5119 UPS battery. Refer to Reconnecting the UPS Battery After Shipping on page 9. 3. Plug the NAP UPS power cable into a 110 or 220 V AC power source using the provided cable. 4.
— This page is intentionally left blank —
