User's Manual
Table Of Contents
- Preface
- 1 NCL1135 Overview
- 2 Network Considerations
- 3 Configuring the NCL1135
- 4 Testing
- 5 Deploying the NCL1135
- 6 Operational Statistics
- 7 Troubleshooting
- Appendix A NCL1135 CommandLine Syntax
- Appendix B Abbreviations and Terminology
- Appendix C Operating Channel Frequencies
- Appendix D NCL1135 Specifications
- Appendix E Configuration Data Record
Appendix A NCL1135 Command-Line Syntax
60 APCD–NC003–1.0
radio unitid (1–16383) Changes the NCL1135 unit ID. An NCL1135 unit ID is a
unique number between 1 and 16383.
radio masterID Displays the Master Unit ID to which the NCL1135
belongs. Available only if the NCL1135 radio type is
Station.
radio masterID (1–16383) Changes the Master Unit ID to which the NCL1135
belongs. Available only if the NCL1135 radio type is
Station.
radio statistics|stats Displays the current radio statistics.
radio type Displays the NCL1135 radio type.
radio type master|station Changes the radio type. Use this to configure an
NCL1135 as a master unit. All NCL1135 units are
factory-configured as ‘station’.
radio station Displays the list of unit IDs to which the master unit can
talk. Available only if the NCL1135 radio type is Master.
radio station add (1–16383) Adds a remote Unit ID to the list of stations to which a
Master Unit can talk. Available only if the NCL1135 radio
type is Master.
radio station del (1–16383) Removes a remote Unit ID from the list of stations to
which a Master Unit can talk. Available only if the
NCL1135 radio type is Master.
radio station disable|enable
unitID
Disables or enables the transmission capabilities of the
remote station.
unitID
is the unit ID of the remote station
that you want to disable. Available only if the NCL1135
radio type is Master.
snmp Displays the SNMP configuration information. SNMP is
useful for monitoring network performance and
debugging.
snmp community Displays the SNMP community table. The default SNMP
communities are: public read and private write.
snmp community add|del
community
read|write
Adds a community name to or deletes one from the
SNMP community table.
• read: enables the community to view the
variables in SNMP.
• write: enables the community to change and
view the variables.
To change SNMP variables, you must have a write
community. To view SNMP variables, you must have a
write or read community.
snmp contact Displays the SNMP system contact (that is, the person
or company).
snmp contact
contact
Changes the SNMP system contact and telephone
number.
contact
is any number of alphanumeric
characters that you can use to define the contact person
or address for the NCL1135.
Command Syntax Description