User's Manual

Chapter 6 Operational Statistics
APCD–NC003–1.0 47
6.2.2 IP Statistics
To see the IP protocol layer statistics for a NCL1135, at the NCL1135> prompt, type
<ip statistics>.
Table 3 provides definitions for the statistics labels.
Information similar to the following example is displayed. The statistics for this command are
from the time of the last reboot of the NCL1135.
NCL1135> ip statistics
IP STATISTICS
-------------
Total packets received 50
Bad checksum discards 0
Packet too short discards 0
Not enough data discards 0
Bad header length discards 0
Bad data length discards 0
Fragments received 0
Fragments dropped 0
Administrative Status Desired state of the interface. The NCL1135 supports UP and
DOWN states.
Operational Status Current operational state of the interface.
Input Octets Number of bytes that arrived on this interface since the last
interface reset or reboot.
Input Unicast Packets Number of unicast packets that arrived on this interface since the
last interface reset or reboot.
Input Non-Unicast
Packets
Number of non-unicast packets that arrived on this interface since
the last interface reset or reboot.
Input Discards Number of packets that arrived on this interface and were
discarded since the last interface reset or reboot.
Input Errors Number of packets that arrived on this interface with errors since
the last interface reset or reboot.
Output Octets Number of bytes that were sent from this interface since the last
interface reset or reboot.
Output Unicast
Packets
Number of unicast packets that were sent from this interface since
the last interface reset or reboot.
Output Non-Unicast
Packets
Number of non-unicast packets that were sent from this interface
since the last interface reset or reboot.
Output Discards Number of outbound packets that were dropped because of
implementation limits since the last interface reset or
reboot.
Output Errors Number of outbound packets dropped because of errors since the
last interface reset or reboot.
Label Description