User's Manual

Chapter 6 Operational Statistics
46 APCD–NC003–1.0
Input Non-Unicast Packets 0
Input Discards 0
Input Errors 0
Input Unknown Protocols 0
Output Octets 25364516
Output Unicast Packets 16759
Output Non-Unicast Packets 0
Output Discards 76
Output Errors 0
more...
Statistics For Radio
-------------------
Flags UP POINT-TO-POINT NOTRAILERS RUNNING NOARP MULTIC
AST
MTU 1552
Hardware Address 00:90:27:b1:ad:01
Administrative Status UP(1)
Operational Status UP(1)
Input Octets 25331759
Input Unicast Packets 16769
Input Non-Unicast Packets 5
Input Discards 0
Input Errors 0
Input Unknown Protocols 0
Output Octets 7441747
Output Unicast Packets 4970
Output Non-Unicast Packets 0
Output Discards 0
Output Errors 0
Table 2 Interface Statistics
Label Description
Flags Specifies the operational state and properties of the interface.
Possible flags are:
• BROADCAST: interface is for a broadcast network
• MULTICAST: interface supports multicasting
• POINT-TO-POINT: interface is for a point-to-point network
• LOOPBACK: interface is for a loopback network
• RUNNING: resources are allocated for this interface
• SIMPLEX: interface cannot receive its own transmissions
• ALLMULTI: interface is receiving all multicast packets
• DEBUG: debugging is enabled for the interface
• NOARP: do not use ARP on this interface
• NOTRAILERS: avoid using trailer encapsulation
• PROMISCUOUS: interface receives all network packets
• TX: a transmission is in progress
• UP: interface is operating
MTU Maximum transmission unit or the size of the largest packet the
interface can handle.
Hardware Address MAC address or Ethernet address of the interface.