User's Manual

Chapter 6 Operational Statistics
42 APCD–NC003–1.0
At a Station NCL1135, you will receive output similar to the following. The following example
was taken at a Station (unit ID 2) communicating with a Master (unit ID 1).
station> radio per single
Unit Id Link Status Total # Received Total # Missed PER (%)
--------- ----------- ---------------- -------------- -------
1 UP 1 0 0
broadcast 72 0 0
station>
To display the radio PER once every second during normal operation,
type <radio per continuous>.
NOTE: All Radio PER results are cumulative.
To clear the Radio PER statistics, type <radio per reset>.
To stop the Radio PER display, press any key.
At a Master NCL1135, you will receive output similar to the following. The following example
was taken at a Master (unit ID 1) communicating with two Stations (unit IDs 2 and 3).
master> radio per continuous
Unit Id Link Status Total # Received Total # Missed PER (%)
--------- ----------- ---------------- -------------- -------
2 UP 2 0 0
3 UP 2 0 0
Unit Id Link Status Total # Received Total # Missed PER (%)
--------- ----------- ---------------- -------------- -------
2 UP 102 0 0
3 UP 42 0 0
Unit Id Link Status Total # Received Total # Missed PER (%)
--------- ----------- ---------------- -------------- -------
2 UP 112 1 0
3 UP 4 0 0
Unit Id Link Status Total # Received Total # Missed PER (%)
--------- ----------- ---------------- -------------- -------
2 UP 140 2 0
3 UP 85 0 0
Unit Id Link Status Total # Received Total # Missed PER (%)
--------- ----------- ---------------- -------------- -------
2 UP 171 2 0
3 UP 101 0 0
master>