User's Manual
Table Of Contents
- Preface
- 1 NCL1135 Overview
- 2 Network Considerations
- 3 Configuring the NCL1135
- 4 Testing
- 5 Deploying the NCL1135
- 6 Operational Statistics
- 7 Troubleshooting
- Appendix A NCL1135 CommandLine Syntax
- Appendix B Abbreviations and Terminology
- Appendix C Operating Channel Frequencies
- Appendix D NCL1135 Specifications
- Appendix E Configuration Data Record
Chapter 3 Configuring the NCL1135
APCD–NC003–1.0 23
NCL1135>
NCL1135> radio channel 1
Radio channel changed to: 1
NCL1135> radio unitid 1001
Unit ID changed to: 1001
NCL1135> radio type master
Radio type changed to: Master
NCL1135> radio station add 101
Station added.
NCL1135> radio station add 102
Station added.
NCL1135> radio station add 103
Station added.
NCL1135> radio
RADIO CONFIGURATION:
Radio type : Master
Wireless ID : 1001
Speed : 11Mbs
Channel : 1
Regulatory Domain : FCC/IC
Frequency : 2.412 GHz
Interframe spacing: 32 (281.6 micro seconds)
Hardware address : 00:90:27:CA:62:A3
Network Card IRQ : 5
NIC Base Address : 0x0d0000
Remote Stations : 101
: 102
: 103
NCL1135> ip address ethernet 10.0.2.44 16
IP addresses:
Ethernet: 10.0.2.44/16
NCL1135> mode bridging
Forwarding mode: Bridging
NCL1135> ip
Forwarding Mode: BRIDGING
Addresses:
Ethernet: 10.0.2.44/16
Routing: IP Routing (Static Only)
Routing Table:
Destination Mask Gateway Flags Protocol Interface
--------------------------------------------------------------------
10.0.0.0 16 10.0.2.44 UC Local eeE0
10.0.2.44 0 10.0.2.44 UHL ICMP lo0
127.0.0.1 0 127.0.0.1 UH Local lo0
--------------------------------------------------------------------
DNS Domain Name:
DNS Servers:
No DNS servers defined.
NCL1135> write
Sets the radio channel
Sets the NCL1135 unit ID
Sets the NCL1135 type to Master
Adds a station to the Master Remote
Station List
Displays the radio configuration
information
Changes the local
Ethernet IP address
Sets the mode to bridging
Displays the IP configuration
information
Saves the configuration