User's Manual
Table Of Contents
- Preface
- 1 NCL1135 Overview
- 2 Network Considerations
- 3 Configuring the NCL1135
- 4 Testing
- 5 Deploying the NCL1135
- 6 Operational Statistics
- 7 Troubleshooting
- Appendix A NCL1135 CommandLine Syntax
- Appendix B Abbreviations and Terminology
- Appendix C Operating Channel Frequencies
- Appendix D NCL1135 Specifications
- Appendix E Configuration Data Record
Chapter 3 Configuring the NCL1135
APCD–NC003–1.0 17
6. If the NCL1135 is a Master, add the unit IDs for the Stations that are configured for this
network group. At the NCL1135> prompt, type <radio station add
station_unitid
> where
station_unitid
is the unit ID for a Station.
NOTE: Repeat step 6 for each Station that you want to add to the
Remote Station List for the Master NCL1135. A maximum of 20
Stations can be added to one Master.
NOTE: To remove a Station from the Remote Station List, type <radio
station del
station_unitid
> where
station_unitid
is the unit ID for the Station you want removed.
7. If the NCL1135 is a Station, add the Master unit ID for the network group. At the
NCL1135> prompt, type <radio masterID
master_unitid
> where
master_unitid
is the unit ID for Master NCL1135 in the network group.
TIP: To display a list of Stations associated with a Master
NCL1135, type <radio station> at the NCL1135>
prompt.
8. At the NCL1135> prompt, type <write> to save the settings to memory.