User Manual

64 APCD–NC003–2.0A
snmp trap add|del
server(aaa.bbb.ccc.ddd)
community
Adds a trap to or deletes one from the SNMP trap
server table. server(aaa.bbb.ccc.ddd) is the IP
address for the trap server. community is the name of
the community on the trap server and can be a
maximum or 16 ASCII characters.
system Displays the system configuration information.
system memory Displays the memory statistics, such as memory
allocation information.
system name Displays the system name.
system name name Changes the system name. name can be a maximum
of 64 ASCII characters that you can use to name the
NCL1135 in your system. The system name is used for
the command-line prompt for the NCL1135.
system network Displays the network system statistics from the network
buffer memory pools.
system network
ethernet|radio|data|system
Displays network buffer pool-allocation information for
each parameter:
system password Changes the password for the NCL1135.
system protocol Displays information about the configuration of
protocols bound to the interface.
system protocol interface Displays the protocol configuration for the specific
interface that you name. interface is either Ethernet
or Radio.
system uptime Displays how long the system has been running. If the
uptime is more than 24 hours, the time appears as n
days, hh:mm:ss where n is the number of days and
hh:mm:ss is the hours:minutes:seconds.
system version Displays the build date and time, and lists all software
libraries and their version numbers.
test radio Performs self tests and displays the results for all the
radio device. If you use this command, the link service is
disrupted for the duration of the test.
reboot|restart|reload|reset Resets the NCL1135.
write|save Saves the current configuration. If you want to save the
new configuration, you must write (save) any
configuration changes before you reboot the NCL1135;
otherwise, the NCL1135 reverts to the previously saved
configuration.
write default|erase Removes all configuration changes, even if you saved
them, and resets the NCL1135 to the factory default
configuration.
Command Syntax Description