User's Manual
Table Of Contents
iv TR2526+ Installation and Operation Guide - r02
Safety Precautions
Read and follow the following safety instructions before installing or operating a TR2526+
device.
WARNING! Do not work on the system or connect or disconnect cables during periods of lightning
activity.
Ne pas travailler sur le système ni brancher ou débrancher les câbles pendant un orage du foudre.
WARNING! Before installing and operating this equipment, read all safety, installation and operating
sections. Retain this manual for future reference. Follow all instructions - failure to do so may result in
damage to the unit or severe personal injury.
Avant d'installer ou d'opérer cet équipement, lisez, toutes les sections de sécurités, d'installations et
d'opérations. Gardez ce manuel comme source de référence. Suivez toutes instructions - si non, vous
risquez d'endommager la machine ou de vous blesser sérieusement.
CAUTION: Cleaning - Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
Le nettoyage - n'utilisez pas de nettoyeurs aérosols ou liquides. Utilisez un tissu humide pour nettoyer.
WARNING! Shock Hazard - An electrical shock hazard exists when the chassis cover is removed. Do
not remove the cover. There are no user serviceable parts inside. Refer all servicing to factory qualified
personnel.
Risque de choc - Il y a un risque de décharge électrique qui existe quand la couverture du châssis est
enlevée. N’ouvrez pas le couverclé de l’appareil. Référez toutes revisions nécessaire au personnel
qualifié de la manufacture.
CAUTION: To comply with FCC RF exposure requirements in section 1.1307, a minimum separation
distance of 1.5 meters is required between this antenna and all persons.
WARNING! The TR2526+ and mast must be grounded correctly according to local and national
electrical codes. Proper grounding is required for safety, equipment protection and best equipment
operation. Ensure that the TR2526+ is properly grounded by attaching a grounding cable to a mounting
bolt on the back of the TR2526+. Art. 820-40 of the NEC (US) provides guidelines for proper grounding
and, in particular, specifies that the grounding cable(s) shall be connected to the grounding system of
the building, as close to the point of cable entry as possible.
WARNING! Use a grounded AC power outlet and install proper grounding to avoid damage from
lightning and power surges.