Manualshelf

User's Manual

ManualsBrandsVecima Networks ManualsElectronics2.5 GHz Subscriber Transceiver
11121314151617181920
Table Of Contents
TR2526+ Installation and Operation Guide - r02 7
Connecting the IF Cable
2.5 Connecting the IF Cable
Connect one end of an RG-59 or RG-6 cable to the TR2526+ F-connector. After connection,
the F connector must be waterproofed with the supplied rubber sealing tape. See “2.6
Water Proofing Connections” on page 8 for details.
Vecima recommends F connectors should be tightened to a maximum torque of 30 in/lb. A
7/16" torque wrench should be used to prevent over tightening. The use of excessive torque
can cause damage to the transceiver connectors or internal circuitry.