User's Manual

TR2526+ Installation and Operation Guide - r02 5
Mounting the Antenna
Figure 2-3: Securing the TR2526+ to the pole
5) Place an #8 lock washer onto the #8-32 screw, followed by the ground wire / ring
terminal from step 1, followed by a second #8 lock washer and thread this assembly
into the ground attachment point provided and tighten.
Figure 2-4: Ground wire assembly and connection
2.3 Mounting the Antenna
Mount the antenna according to the manufacturer’s instructions.
Top View of TR2526+
Mounted on Pole
#8-32 Screw
#8 Lock Washer
Preassembled ring
terminal / ground wire
Ground attachment location
Note: The TR2526+ is intended for use with flat planar arrays and dipole/parabolic reflectors. Please
consult the following table for further information.