User's Manual

4 TR2526+ Installation and Operation Guide - r02
Mounting the TR2526+

2.2 Mounting the TR2526+
The TR2526+ was designed for mounting to a pole with a diameter of 1.0" to 1.75". Please
ensure that the pole used is attached securely to the building or other mounting location.
Mounting the Unit
1) Measure the required length of ground wire (not supplied) and crimp on a ring terminal
(not supplied) to one end of the ground wire.
Figure 2-1: Ground wire and ring terminal
2) Position the pole catch, that is part of the TR2526+ chassis, against the pole.
Figure 2-2: Positioning the pole catch
3) Insert the V-Bolt around the pole and through the holes either side of the TR2526+ pole
catch.
4) Thread a ZN1/4-07 lock nut onto each arm of the V-Bolt and tighten to secure the
TR2526+ to the pole.
To Earth Ground
TR2526+
Pole