User's Manual

WaveCom Electronics Inc
TRI5758 Manual; ML_TRI5758_03 (June 2003)
Approval Pending
9
Carefully remove the equipment from its packing material and set it on a solid surface, such as a table or desk. If it
appears damaged in any way, notify the carrier, and keep all packing materials for inspection by the carrier’s
agent.
The following hardware is included in the box for mounting the brackets to the pole:
• 1 L-bracket (taped to one of the foam pieces inside the box)
• 1 pole catch
• 1 V-bolt
• 4 #10-32 flange locknuts for connecting L-bracket to cover
• 2 ¼ - 20 flange locknuts for connecting V-bolt and pole catch to the pole
The TRI5758 was designed for mounting on a pole with a diameter of 1.0” to 1.75”. Please ensure that the pole
used is attached securely to the building or other mounting location.
Step 1 – Attach L-Bracket to TRI5758
Before the unit can be attached to the pole, the L-bracket must be attached in the correct orientation according to
the polarization required for the particular customer installation. Diagram 2.2A shows the orientation of the bracket
relative to the cover for both horizontal and vertical polarization.
The active or desired polarization is the one in which the arrow points up. For example, when the TRI5758 is
mounted on the pole, if the arrow pointing up on the back of the TRI5758 says “Horizontal Polarization” then the
horizontal polarization is the active polarization. When the TRI5758 is mounted on the pole, if the arrow pointing
up on the back of the TRI5758 says “Vertical Polarization”, the vertical polarization is the active polarization
Secure the L-bracket to the cover using the #10-32 locknuts.