User's Manual

WaveCom Electronics Inc
TRI5758 Manual; ML_TRI5758_03 (June 2003)
Approval Pending
14
+*,+&-
Connections to the TRI5758 are made as shown in Diagram 2.3A
Please note:
1) Connect the TRI5758 F-Connector to the power inserter, located indoors with the cable modem. The power
inserter is then connected to the Cable Modem, only after the antenna is aligned. The power inserter has
three connections:
DC POWER Connect to wall adapter with the supplied RG-59 cable with F connectors
TO MODEM Connect to cable modem (install modem only after the antenna is aligned)
TO TRANSCEIVER Connect to TRI5758
WARNING!
If the power inserter is incorrectly connected, the TRI5758 will not operate, and the
cable modem could be damaged.
Ensure that the unit is connected in the fashion shown in Diagram 2.3A before
plugging in the wall adapter.
2) After connection, the F connector on the TRI5758 must be waterproofed with the supplied rubber sealing tape.
See section 2.4 for details.
D IAGRAM 2.3A: C ONNECTION TO C ABLE M ODEM VIA P OWER I NSERTER