User's Manual

WaveCom Electronics Inc

TRI5758 Manual; ML_TRI5758_03 (June 2003)

Approval Pending

STEP 2 – Position V-bolt and pole catch around pole

To attach the TRI5758 to the pole, first position the pole catch over the threads of the V-bolt and hold against the

pole with one hand.

STEP 3 – Position TRI5758 against pole

Using the other hand, bring the TRI5758 up to the pole catch and grab V-bolt, pole catch and L-bracket in a single

hand. Ensure that the pole is inside the “L” of the L-bracket and not on the outside of the L. This is necessary to

maintain antenna alignment during high winds.

STEP 4 – Tighten TRI5758 against pole

Tighten both ¼” locknuts against the L-bracket so that the unit is held against the pole but can still be rotated and

tilted up and down for antenna alignment. The locknut closest to the antenna can be tightened almost all the way

while the back one should be approximately finger tight.