User's Manual

VCom Inc.

TRI1819 Manual; ml_tri1819_02(Feb 2005)

Approved: C.H.

2.3 Connection to the Power Inserter and Cable Modem

Connections to the TRI1819 are made as shown in Diagrams 2.2B and either 2.3A or 2.3B depending on which

power supply and inserter came with the TRI1819.

Please note:

1) Connect the TRI1819 F-Connector to the power inserter, located indoors with the cable modem. The power

inserter is then connected to the Cable Modem, only after the antenna is aligned. The power inserter has

three connections:

DC POWER Connect to wall adapter with the supplied RG-59 cable with F connectors

TO MODEM Connect to cable modem (install modem only after the antenna is aligned)

TO TRANSCEIVER Connect to TRI1819

WARNING!

If the power inserter is not correctly connected, the TRI1819 will not operate, and

there is the potential to damage the cable modem.

Ensure that all wires and cables are hooked up before plugging into the AC

adapter/power supply (i.e. hook up to the power supply last).

2) After connection, the F connector must be waterproofed with the supplied rubber sealing tape. See Section 2.4

for details.

IAGRAM

IAGRAM IAGRAM

IAGRAM 2.3A: C

2.3A: C2.3A: C

2.3A: CONNECTION TO

ONNECTION TO ONNECTION TO

ONNECTION TO C

CABLE

ABLE ABLE

ABLE M

MODEM VIA

ODEM VIA ODEM VIA

ODEM VIA P

POWER

OWER OWER

OWER I

INSERTER

NSERTER NSERTER

NSERTER U

USING

SING SING

SING PS24V750MA

PS24V750MAPS24V750MA

PS24V750MA-

-01

0101