User's Manual

2.0 INSTALLATION
2.1 Unpacking the Unit
Carefully remove the equipment from its packing material and set it on a solid surface, such as a table or
desk. If it appears damaged in any way, notify the carrier, and keep all packing materials for inspection by the
carrier’s agent.
2.2 Mounting the Unit
2.2.1 Mounting the TR707+
The following hardware is included in the box for mounting the TR707+ to the pole:
• One V-bolt to secure the TR707+ to the mounting pole
• Two ¼” flange locknuts to secure the V-bolt
The TR707+ was designed for mounting to a pole with a diameter of 1.0" to 1.75". Please ensure that the pole
used is attached securely to the building or other mounting location. Secure the TR707+ unit to a pole as
shown in Figure 2.2A with F-Connector on the bottom.
DIAGRAM 2.2A: MOUNTING THE UNIT
Top view of TR707+ mounted on
pole
2.2.2 Mounting the Antenna
Mount the antenna according to the manufacturer’s instructions.
( The TR707+ is intended for use with planar arrays and Yagi antennas. Please consult table 2.2B for
further information.
TABLE 2.2B: ANTENNA LIST
Transceiver Power Antenna Type Antenna Gain
[Watts] [dBm] [dBi]
0.25 +24 Yagi 10 dBi
0.25 +24 Flat planar array 9 dBi
0.25 +24 Window mount planar array 7 dBi
tr707_ml_r01_sd Approved: G.V. 3
Vecima Networks Inc