User's Manual

2.4 Connection to the Power Inserter and Cable Modem
Connections to the TR707+ are made as shown in Diagrams 2.3A and 2.4A.
The power inserter has three connections:
DC POWER Connect to wall adapter with RG-59 cable with F connectors
TO MODEM Connect to cable modem
TO TRANSCEIVER Connect to TR707+
WARNING!
If the power inserter is not connected correctly, the TR707+ will not
operate, and there is the potential to damage the cable modem.
Ensure that all wires and cables are hooked up before plugging into the AC
adapter/power supply (i.e. hook up to the power supply last).
After connection, both connectors MUST be waterproofed with the supplied rubber sealing tape. See Section 2.5
for details.
DIAGRAM 2.4A: CONNECTION TO CABLE MODEM VIA POWER INSERTER
tr707_ml_r01_sd Approved: G.V. 6
Vecima Networks Inc