User's Manual

obr3650hp_ml_r01_sd Approved: D.W.
3-3
3.3 Using the Web Based Interface
The Web interface of the OBR3650HP system may be viewed with a standard web browser such as Mozilla™ or Internet
Explorer™, no additional add-ins are required.
NOTE
If your Web certificate is invalid or expired, you will be prompted to continue without the certificate or add an
exemption to the certificate.
The following are the default log on settings for the Base station Web-based interface:
• Web-based interface access — https://192.168.101.2
• subnetwork mask — 255.255.255.0
•username — root
• password — vistamax
To log on to the Web-based interface:
Step 1 Open a Web browser and open the Web-based interface by typing https://192.168.101.2 in the
address bar. The Network Password page opens:
NOTE
192.168.101.2 is the default IP address that comes preconfigured from Vecima, but your IP address
might be different. If you are not using the default address, contact your system administrator for the IP
address.
Step 2 Type the username root and the password vistamax to access the web GUI. The log on screen displays: