Installation Instructions

obr3650hp_ml_r01_sdApproved: C.W.
3-16
To verify the upgrade:
Step 1 Click Status > General Status. The General Status page opens:
Step 2 Read the Versions/Serial Number Information to ensure the proper version is running.
3.7.2 Adding a Virtual IP Address
The ability to define virtual addresses on the Base Station will allow you to access the Base Station from more than one
domain. Set up a virtual address by adding a new IP addresses into the Base Station through the Network Configuration
menu.
To add a Virtual IP Address:
Step 1 Log on to the Web-based interface and click Configuration > Network Configuration. The Current
Interfaces table displays showing the primary (br0) IP address and virtual addresses (br0:1 br0:2, etc.) for
your base station.
Step 2 Click Add Virtual Interface. The Add Virtual Interface page appears.
Step 3 Type the name for the new virtual interface in the Virtual Interface Name field. Enter an IP address for the
new domain that you wish to add in the IP Address field and the subnet address in the Subnet Mask field.
Step 4 Click Add.
Step 5 Repeat steps 2 to 4 until you have added all the virtual addresses that you need.