Installation Instructions

obr3650hp_ml_r01_sd Approved: C.W.
3-5
Step 2 Click the br0 link under Name field in the Current Interfaces table. The window will change to this.
• In the Primary IP Address field, enter the new IP for the Base Station: 192.168.101.138
• In the Primary IP Subnet Mask field, enter the subnet mask for the Base Station. 255.255.255.0
• In the Primary IP Gateway field, enter the gateway address for your network 192.168.101.3
Step 3 Click the Submit button. The following message appears:
Step 4 Click the here
link to make the change permanent.
NOTE
At this point, you may need to change the IP configuration of the computer which you are using to
access the base station.If you have completely changed the domain for the Base Station (was
192.168.101.1, now 172.200.26.1), please ensure the IP of the computer is capable of
communicating with the new IP address of the BS. If not, adjust the network configuration of the
computer accordingly before moving on to the next step.
The following information displays on the page to indicate the changed IP address:
The address on the browser also changes to reflect the new IP address:
https://192.168.101.138/cgi-bin/index.cgi
NOTE
If you were not able to reconnect and click the here link to confirm the IP address of the Base Station
within 2 minutes, the Base Station will revert to the old IP address and reboot automatically. Please
restart the IP address change process by going back to step 1.
Step 5 Once you have made the correct configuration settings, click the Submit button at the bottom of the window.
Step 6 To apply the Radio Configuration, click Apply Configuration from the menu options. The configuration area
displays a list of changes made. Click Yes to apply the changes.