Installation Instructions
obr3650hp_ml_r01_sdApproved: C.W.
2-4
After preparing the OBR3650HP for pole mounting, hold the OBR3650HP against the pole at the desired height then
place the Pole Catch Bracket onto the opposite side as shown in Figure 2-4. Fasten a lock washer and nut onto all four
carriage bolts and tighten until the OBR3650HP is suitably secured in place.
Figure 2-4 Attaching the OBR3650HP to the Pole
3ROH0RXQWLQJ6LGH9LHZ
3ROH0RXQWLQJ7RS9LHZ
µWRµ
)DVWHQDQXWDQGORFNZDVKHU
WRHDFKFDUULDJHEROW
)DVWHQDQXWDQGORFNZDVKHU
WRHDFKFDUULDJHEROW