User's Manual Part 2

obr3650_ml_01_sd Approved: C.W.
3-19
To provision a subscriber station:
1) Type a MAC address in the field provided or select one from the list of that appears when you select Existing MAC.
2) Choose the service flows that you want to assign to the selected MAC address by clicking the SFID check boxes
that correspond to the predefined service flows.
3) Click Provision Selected. The new MAC address appears in the Provisioned Service Flows table with the
associated service flow.
To remove the service flow from a subscriber station:
1) Select a MAC Address from the Provisioned Service Flows table by selecting the corresponding check box.
2) Click UnProvision Selected to remove the provisioned service flow from the subscriber station.