User Manual

Appendix A: Factory Configuration
APCD-WM001-1.0 28
* These parameters can be set using Automatic Remote Configuration if the network is
configured to use a RADIUS Server.
Radio Power* +26 dBm (High) - To be consistent with
previous modems, +26 is used in the CLI to
indicate maximum output power. The
MMT9000 actually outputs about 27.3 dBm
Peak power = 26.0.dBm average power.
(NOTE: For configuring the modem, the
power values entered are rounded to the
nearest dB)
SNMP Name* (= Console Prompt) Station ID
SNMP Contact* WaveRider Communications Ltd.
SNMP Location* www.waverider.com
SNMP Read Communities* None entered
SNMP Write Communities* None entered
SNMP Traps* None entered
Statistics Log Interval 15 minutes
Parameter Default Configuration