User Manual

:
APCD-WM001-1.0 x
It is the responsibility of the operator to ensure that the public is not exposed to excessive
Radio Frequency (RF) levels. The applicable regulations can be obtained from local
authorities.
WARNING!
To comply with FCC RF exposure limits, the MMT9000 mobile
antennas must be mounted to provide a separation distance
of 20cm (8 inches) or more from all persons. The MMT9000
panel antenna must be mounted to provide a separation
distance of 30cm (12 inches) or more from all persons. The
distance is measured from the nearest point of the antenna to
the human body.
WARNING!
The MMT9000 is only to be installed by qualified professional
installers, who are familiar FCC regulations and with
installing radio transmission equipment, especially in
vehicles. The installer must be familiar with all installation
procedures and restrictions contained herein.
Important Safeguards
WARNING!
CAUTION: To reduce risk of electrical shock, do not remove
covers, since there are no user-serviceable parts inside.
Refer servicing to qualified personnel.
1. Read all these instructions before installing and operating the MMT9000.
2. Retain these instructions for future reference.
3. Heed all warnings on the MMT9000 and in these instructions.
4. Follow all instructions.
5. Disconnect MMT9000 from its power source before cleaning. Clean only with a damp
cloth.
6. Use only attachments recommended by WaveRider.
7. The metal housing protects the MMT9000 from overheating to ensure reliable
operations. Do not cover the MMT9000. Although the MMT9000 has been rated for a
wide range of temperatures, it will perform better and longer if proper ventilation is
provided.