User's Manual

ma4367_ml_03_sd Approved: B.G. 8
Vecima Networks Inc.
1.5 Specifications
IF INPUT
IF Center Frequency 44.00 MHz
Input Bandwidth 6.0 MHz
IF Input Level 25 to 35 dBmV
Input Connector F female connector, 75 ohm
IF AGC Selectable enable/disable
RF OUTPUT
Output Frequency Band 2505 to 2681 MHz
Linear Output Power [64/256 QAM] +36 dBm for MER >= 38 dB
Output level adjustment 0 to -15 dB
Spectrum Inverted relative to IF input
Output Connector N female connector, 50 ohm
Frequency Step Size 62.5 kHz steps, 2505 to 2681 MHz
Output Bandwidth 6.0 MHz
Frequency Stability (10 to 40°C) ±3 kHz (MA4011B/MA4012B TCXO 1 ppm)
Gain Flatness ±0.8 dB over 6 MHz
Gain Stability ±0.7 dB (10 to 40°C)
Mute Level -60 dBc
Phase Noise -94 dBc/Hz at 10 kHz offset
POWER CONSUMPTION
AC Option 120 VAC nominal (100 to 240 VAC), 50/60 Hz, 175 W max.
DC Option -48 VDC nominal (-36 to -60 VDC), 175 W max.
MISCELLANEOUS
Remote Control Interface RS232/RS485 (SNMP or alarm contact closure optional)
Remote Control Connector RJ45 (in and out)
Operating Temperature 10 to 40°C (50 to 104°F)
Relative Humidity 95% max.
Configuration Standard 19" rack mount, 4U height, front panel control/display
Dimensions 17.5" (w) x 13.7" (d) x 7" (h) (44.4 x 34.8 x 17.8 cm)
COMPONENTS
MA4003 MMDS Chassis
MA4011B (AC) or MA4012B (DC) power/control modules
MA4061B MMDS Upconverter
MA4070C MMDS Power Amplifier
Specifications subject to change without notice.
1.6 Available MA4367 System Configurations
The MA4367 is available in the following configurations:
System
Description
MA4367AC 2.5GHz TX/UC System,100-240VAC
MA4367AC/SNMP 2.5GHz TX/UC System,100-240VAC,SNMP
MA4367AC/SNMP/EA 2.5GHz TX/UC System,100-240VAC,SNMP,ExternalAlarm
MA4367DC 2.5GHz TX/UC System,-48VDC
MA4367DC/SNMP 2.5GHz TX/UC System,-48VDC,SNMP
MA4367DC/SNMP/EA 2.5GHz TX/UC System,-48VDC,SNMP,ExternalAlarm