User's Manual

ma4367_ml_03_sd Approved: B.G. 42
Vecima Networks Inc.
d) Press Enter at the point to load the Setup Mode; the Current Settings will then be displayed.
Current settings:
Hardware: Ethernet Autodetect AUI
IP addr: 010.010.010.011
No gateway set
Netmask: 255.255.255.000--- not set ---
Baudrate: 09600
I/F Mode: 4C
Flow: 00
Chassis addr: 999
SNMPEnable: No
SNMP community name for read:
SNMP community name for write:
Change Setup
0 Basics
1 Connection
2 Community strings
8 Exit
9 Save and exit
Select:
e) As you can see there are 03 main submenus:
0) Basic = SNMP Agent IP Address, subnet mask, IP for SNMP Manager/Traps, password set
Select: 0
IP Address: (010) .(010) .(010) .(011)
Set Gateway IP Address (N) N
Netmask: Number of Bits for Host Part (0=default) (08)
IP Address for SNMP Traps: (000) .(000) .(000) .(000)
Change telnet config password (N) N
1) Connection = Baudrate, I/F Mode, Chassis address, SNMP Enable
Select: 1
Baudrate (09600)
I/F Mode (4C) ?
Flow (00) ?
Chassis address (999) ← Note: must be same as Chassis Address set on MA4012B
SNMPEnable (N) N