User's Manual

ma4367_ml_03_sd Approved: B.G. 41

Vecima Networks Inc.

APPENDIX B – MA4367 SNMP AGENT CONFIGURATION PROCEDURE

The MA4367 SNMP agent is an optional feature that must be factory installed at time of order

a) Once PC on same 10.10.10.0 network is connected to the unit with a cross-over Ethernet cable try pinging the

unit. This can be done from the DOS prompt.

Microsoft Windows XP [Version 5.1.2600]

C:\>ping 10.10.10.11

Pinging 10.10.10.11 with 32 bytes of data:

Reply from 10.10.10.11: bytes=32 time=1ms TTL=64

Reply from 10.10.10.11: bytes=32 time=2ms TTL=64

Ping statistics for 10.10.10.11:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 1ms, Maximum = 2ms, Average = 1ms

b) In order to be sure that you are indeed connected to the right unit check the arp cache. The MAC/physical

address listed for 10.10.10.11 should be the same address listed on the back label of the unit.

C:\>arp -a

Interface: 10.10.10.2 --- 0x10004

Internet Address Physical Address Type

10.10.10.11 00-20-4a-72-1b-5c dynamic

c) In order to access the SNMP Agent configuration menus telnet to 10.10.10.11 9999.

C:\>telnet 10.10.10.11 9999

*** Wavecom SNMP Proxy Agent

Serial Number 7207004 MAC address 00:20:4A:72:1B:5C

Software version V5.20

Press Enter to go into Setup Mode