User's Manual
ma4367_ml_03_sd Approved: B.G. 35
Vecima Networks Inc.
T
ABLE 6.5.2A : RESPONSE PARAMETERS FOR STATUS UNITS REQUEST
Parameter (Units) Format Example
Model XXXXXXXXXXX MA4070C
Module SN XXXXXXX 0123456
Hardware Revision XXX 010 (i.e. Rev 1.0)
Microcontroller Revision XXX 010 (i.e. Rev 1.0)
Miscellaneous 16 chars
SC - Status Configuration Request
Description: The Status Configuration Request command returns the active configuration, including error codes and alarm status
for the addressed module. It also returns the current status of the power supply module. The detailed contents of the
reply are shown in the response section.
Parameters: None
Example: *999<sp>A<sp>SC<sp>CRC<cr>
Response: OK or ERR or CRC or MOD
If the response is OK, then the following parameters will also be returned in space delimited format in the order
shown below. (Note: X may be replaced by any valid character. All other characters will be as shown). Error codes
are the last two digits reported on the status code line. Refer to Section 6.0, Error Codes for more details.
T
ABLE6.5.2B : RESPONSE PARAMETERS FOR STATUS CONFIGURATION REQUEST
Parameter (Units) Format Example
MA4070C Status Code XXXX 0101
MA4070C RF Power (dBm) XXX.X 31.5
MA4070C RF Reverse Power (dBm) XX.X < 20
FPHS – Forward Power High Set
Description: Sets the Forward Power High for the specified module. When the Forward Power High is enabled, and the RF Power
is above the threshold limit, a non-critical alarm will be triggered.
Parameters: Desired RF Thresholds in dBm, in the form XX.X. The decimal point and trailing characters are required. The trailing
character can range between 0.0 and 0.9
Example: *999<sp>B<sp>FPHS<sp>38.0<sp>CRC<cr>
Response: OK or MOD or ERR or CRC
FPHE – Enable Forward Power High
Description: Enables the Forward Power High for the specified module. When the Forward Power High is enabled, and the RF
Power is above the threshold limit, a non-critical alarm will be triggered.
Parameters: None
Example: *999<sp>B<sp>FPHE<sp>CRC<cr>
Response: OK or MOD or ERR or CRC