User's Manual
ma4367_ml_03_sd Approved: B.G. 24
Vecima Networks Inc.
5.0 STATUS AND ERROR CODES
5.1 MA4061B Status and Error Codes
The status and error codes are displayed on line 2 of the LCD display. They consist of an ‘s’ or ‘e’ character followed by a 2
digit hexadecimal number. The following tables can be used to interpret the meaning of the digits. For example, a display of
s02 e40 indicates that IF AGC is enabled and there is an IF Threshold error. If there are no errors, the error code will not be
displayed, and only the status will be visible.
Status Code Left Digit
0 1 2 3 4 5 6 7 8 9 A B C D E F
Status
•
Backup relay enabled
• • • • • • • • • • • • • •
Unused
Status Code Right Digit
0 1 2 3 4 5 6 7 8 9 A B C D E F
Status
•
•
•
•
•
•
•
•
Output is disabled
• •
• •
• •
• •
IF AGC is enabled
• • • •
• • • •
IF threshold detection is enabled
• • • • • • • •
RF threshold detection is enabled
Error Code Left Digit
0 1 2 3 4 5 6 7 8 9 A B C D E F
Status
•
•
•
•
•
•
•
•
Fixed LO error
• •
• •
• •
• •
IF AGC error
• • • •
• • • •
IF threshold error
• • • • • • • •
RF threshold error
Error Code Right Digit
0 1 2 3 4 5 6 7 8 9 A B C D E F
Status
•
•
•
•
•
•
•
•
Output is muted
• •
• •
• •
• •
Hard alarm condition
• • • •
• • • •
Soft alarm condition
• • • • • • • •
Variable LO error