User's Manual

ma4367_ml_03_sd Approved: B.G. 23
Vecima Networks Inc.
4.2 MA4061B - MMDS Upconverter Card
DIAGRAM 4.2A : REAR PANEL – MA4367
RF OUT
The RF out SMA connector provides the RF output signal from 2505 to 2681 MHz with a level of -15 to 3 dBm. The impedance
is 50 ohm.
IF IN
The IF Input F connector accepts an input signal at 44 MHz with up to a 6 MHz bandwidth from a 75 ohm source. The level
should be from +25 to +35 dBmV.
4.3 MA4070C - Power Amplifier
DIAGRAM 4.3A: REAR PANEL – MA4367
RF OUT
The RF output N connector provides the RF output signal from 2505 to 2681 MHz. The impedance is 50 ohm
RF IN
The RF Input SMA connector accepts an input signal at 2505 to 2681 MHz with up to a 6 MHz bandwidth from a 50 ohm
source.
RF OUT RF IN
MMDS
POWER AMPLIFIER
Vecima Networks
MA4070C
RF OUT
IF IN
MMDS DIGITAL
UPCONVERTER
Vecima Networks
MA4061B