User's Manual

ma4367_ml_03_sd Approved: B.G. 20
Vecima Networks Inc.
4.0 REAR PANEL CONNECTIONS
The MA4367 can use either an AC or DC power/control module. The diagram below shows a rear panel with an AC
power/control module.
D
IAGRAM 4.0A: REAR PANEL – MA4367 SYSTEM
REMOTE
INTERFACE
MADE IN
CANADA
100-240VAC, 4A MAX.
50-60Hz
FUSE 5A, 250V
ALARM
10MHz
REF IN
RF OUT
IF IN
MMDS DIGITAL
UPCONVERTER
Vecima Networks
MA4061B
RF OUT RF IN
MMDS
POWER AMPLIFIER
Vecima Networks
MA4070C
4.1 MA4011B – AC Power/Control Module
DIAGRAM 4.1A : REAR PANEL – MA4367
AC POWER ENTRY MODULE
The AC input accepts input from 100 – 240 VAC. The fuse is internal to the IEC holder. If the fuse requires replacement, ensure
the voltage and current rating is correct. Turn off the AC power switch and then remove the AC cord to power off the chassis.
4.1 MA4012B – DC Power/Control Module
DIAGRAM 4.1B : REAR PANEL – MA4367