User's Manual

WaveCom Electronics Inc
MA4061/MA4070 Manual; MAN1L2301 Rev03 (Mar 2002)
Approved: R. L.
37
SU - Status Unit Request
Description: The Status Unit Request command returns the factory model and revision history for the specified
module. The detailed contents of the reply are shown in the response section.
Parameters: None
Example: *999<sp>A<sp>SU<sp>CRC<cr>
Response: OK or MOD or ERR or CRC
If the response is OK, then the following parameters will also be returned in the order shown below. (Note: X
may be replaced by any valid character. All other characters will be as shown).
T
TT
T
ABLE
ABLE ABLE
ABLE 7.5.1
7.5.17.5.1
7.5.1A
A A
A : R
: R: R
: RESPONSE
ESPONSE ESPONSE
ESPONSE P
PP
PARAMETERS FOR
ARAMETERS FOR ARAMETERS FOR
ARAMETERS FOR S
SS
STATUS
TATUS TATUS
TATUS U
UU
UNITS
NITS NITS
NITS R
RR
REQUEST
EQUESTEQUEST
EQUEST
Parameter (Units) Format Example
Model XXXXXXXXXXX Upconverter
Module SN XXXXXXX 0123456
Hardware Revision XXX 010 (i.e. Rev 1.0)
Microcontroller Revision XXX 010 (i.e. Rev 1.0)
PLD Revision XXX 010 (i.e. Rev 1.0)
Miscellaneous 16 chars
7.5.2 MA4070B Upconverter Detailed Command Descriptions and System Responses
This section defines each of the command codes and the associated parameters for the MA4070B Power
Amplifier module.
OE - Enable Output
Description: Turns on the Output from the specified module.
Parameters: None
Example: *999<sp>A<sp>OE<sp>CRC<cr>
Response: OK or MOD or ERR or CRC
OD - Disable Output
Description: Turns off the Output from the specified module.
Parameters: None
Example: *999<sp>A<sp>OD<sp>CRC<cr>
Response: OK or MOD or ERR or CRC
LE - Enable Local Control
Description: Enables local control of the MA4001B chassis. The module address must indicate a valid module even
though the command does not change any module settings.
Parameters: None
Example: *999<sp>A<sp>LE<sp>CRC<cr>
Response: OK or MOD or ERR or CRC