User's Manual

WaveCom Electronics Inc
MA4061/MA4070 Manual; MAN1L2301 Rev03 (Mar 2002)
Approved: R. L.
12
The final three characters indicate if local front panel control of the MA4001B chassis is enabled (“L/R”) or
disabled (“_R_”). Remote control of the chassis is always available.
MODULE SELECT BUTTON
The MODULE SELECT button allows the user to select the module to display and/or control (the MODULE
SELECT LED will be lit on the selected module, and the LCD display will indicate the module address in the
status line).
MODE BUTTON
The MODE button allows the user to cycle through each of the various modes for the selected module.
UP/DOWN BUTTONS
The UP/DOWN arrow buttons adjust the settings for the currently selected mode of the selected module.
POWER ON LED
When the green POWER ON indicator is illuminated, the module has been correctly installed and powered on.
ALARM LED
A constant Alarm LED on the MA4010B indicates a critical alarm condition. Detailed alarm information is
available by selecting the module from the front panel and observing the status and error codes on the LCD
display.
MODULE SELECT LED
When the green MODULE SELECT indicator is illuminated, it indicates that the corresponding module has
been selected from the front panel or via the remote control interface.
AUX LED
This LED is reserved for future use.