User's Manual

WaveCom Electronics Inc

MA4061/MA4070 Manual; MAN1L2301 Rev03 (Mar 2002)

Approved: R. L.

2.5 Module Installation/Replacement

1. Power off the chassis using the rear panel AC switch

2. Disconnect the RF cables from the rear of the corresponding module

3. Using a screwdriver, loosen the corresponding front panel captive screws until the module is free to pull forward

4. Insert the replacement module and retighten the front panel captive screws

5. Turn on the AC power switch

6. Configure the output frequency and configure IF/RF levels

7. Reconnect the rear panel RF cables