User Guide

Testing Your EUM3000
12 APCD-LM013-D
To Verify Proper EUM3000 Function
1. Check the User Connectivity LED to test the link to between
the EUM3000 and your computer. Refer to Table 1 for an
explanation of the different User Connectivity status displays.
Table 1 User Connectivity LED Status Displays
2. Check the Received Signal Strength Indicator (RSSI) LED to
ensure that the antenna is receiving an optimum signal in its
current location. Refer to Table 2 for an explanation of the
different RSSI LED status displays.
Table 2 RSSI LED Status Displays
Off
The link to your computer is not
functioning.
Solid On
The link to your computer is functioning
and the radio is receiving data.
Flashing
The EUM3000 is sending data.
Off
No signal is detected. The antenna is
disconnected or is not aligned with your
wireless internet service provider’s
antenna.
Slow Flash
The signal strength is poor.
Fast Flash
The signal strength is good.
Solid On
The signal strength is very good.