User Guide

Connecting Kit Components
APCD-LM013-D 9
NOTE: The DC power cable features a secure
locking connector. To disconnect the
cable, pull the collar back on the
connector, then continue pulling to detach
the DC power cable from the EUM.
Your EUM3000 uses a custom antenna cable and connector. If you
need to extend this cable, contact your Wireless Internet Service
Provider (WISP).
4. Connect the AC-power cord between the DC converter and an
AC outlet (Figure 4). Your EUM3000 will power-up; there is no
ON/OFF switch on the modem.
NOTE: WaveRider recommends that you use a
power bar with surge protection (instead
of connecting the AC-power cord directly
to an AC outlet) to avoid potential
damage to the EUM3000 components in
the event of a power surge.
Figure 4 Connect the AC Power Cord
AC Power Cable
AC Outlet
DC Converter