User's Manual Part 2

APCD-LM043-8.0 (DRAFT C) 251
Appendix I SNMP MIB Definitions
This appendix defines the MIBs used in the CCU and EUM. These MIBs are organized under
the following headings:
•
MIB-II Elements Supported from RFC-1213 on page 251
•
WaveRider CCU Enterprise MIBs on page 255
•
CCU RFC MIB-II Traps on page 266
•
WaveRider EUM Enterprise MIBs on page 267
•
EUM RFC MIB-II Traps on page 276
MIB-II Elements Supported from RFC-1213
The CCU and EUM support the following MIB-II groups, which are defined in detail in
RFC1213.
Groups in MIB-II
MIB-II is divided into the following MIBs. All values in Table 56 are prefixed by 1.3.6.1.2.1.
Table 56 Groups in MIB-II
MIB Name OID Type Status Description
system 1 MIB R This group provides information on the general system, such as
system description, contact, system up time.
interfaces 2 MIB R This group has one set of values for each interface on the
modem. The CCU/EUM has 3 interfaces: 1= loopback, 2 =
esmc0 (ethernet) and 2 = mdr1 (radio).