User's Manual Part 2

Appendix G: CCU/EUM Data Tables
APCD-LM043-8.0 (DRAFT C) 243
Table 54 Bridge Table Entries
NOTE:
If customer max is set to 1, and you want to connect a different
PC to the EUM, for maintenance purposes, for example, you
must clear the Bridge Table, reset the EUM, and wait 10 minutes.
To display the Bridge Table:
60:03:3a> cust
MAC Address Air Access Time[s]
-------------------------------------------
00:50:da:b7:34:f3 Y 100
00:50:da:bb:d1:de N 100
Total of: 2 entries
Basic Configuration File (CCU and EUM)
The Basic Configuration File (BCF) presents a summary of CCU and EUM configurable
parameters, which are either the factory default settings, or those entered by the system
operator. The BCFs for the CCU and EUM are slightly different, as shown in the examples
below.
EUM BCF
60:ff:fe> bcf
Basic Cfg File:
File ID : basic.cfg
File Time Stamp:
File Version : 5
File Notes : Operator updated
File CRC : 0xE1
IP Address: 192.168.10.250 / 24
IP Subnet : 192.168.10.0 ( 255.255.255.0 )
Gateway IP Address: 192.168.10.1
Contact: WaveRider Communications Inc.
Location: www.waverider.com
Name: LMS3000
Table Entry Description
MAC Address Computer’s MAC address
Air Access
(EUM Only)
Y - computer has been granted air access.
N - computer has not been granted air access
Time (s)
Time, in seconds, since the last packet was received from a particular
end-user computer or device.