User's Manual Part 2

Appendix G: CCU/EUM Data Tables
APCD-LM043-8.0 (DRAFT C) 235
Table 50 Routing Table Flags.
To use Table 50, consider the flag associated with the default route, 803, which is equal to
(800 + 2 +1). Referring to Table 50, this route was manually added, the destination is a
gateway, and the route is usable.
With the CCU in
routed mode, you can display the routing configuration file by entering rcf in
the CCU command line:
60:02:xx> rcf
File ID : route.cfg
File Time Stamp:
File Version :
File Notes : Default File - Auto Created
File CRC : 0xDE
Routing Table:
Destination Address: 172.24.8.0
Gateway Address : 192.168.10.1
Destination Mask : ffffffff
TOS : 0
Flags : 0
Destination Address: 172.24.11.255
Gateway Address : 192.168.10.1
Destination Mask : ffffffff
TOS : 0
Flags : 0
The above example shows a routing table to which two routes have been manually added.
Flag Mask Description
0x1
0x2
0x4
0x8
0x10
0x20
0x40
0x80
0x100
0x200
0x400
0x800
0x1000
0x2000
0x4000
0x8000
Route usable
Destination is a gateway
Host entry (net otherwise)
Host or net unreachable
Created dynamically (by redirect)
Modified dynamically (by redirect)
Message confirmed
Subnet mask present
Generate new routes on use
External daemon resolves name
Generated by ARP or ESIS
Manually added
Just discard packets (during updates)
Protocol specific routing flag
Protocol specific routing flag
Modified by management protocol