User's Manual Part 2

232 APCD-LM043-8.0 (DRAFT C)
Appendix G: CCU/EUM Data Tables
Table 47 Port Filter Table Entries
To access the Port Filter Table:
60:03:3a> port
PORT FILTERS
Port Filter
---------------------------------
445 both
137 both
138 both
139 both
1512 both
----------------------------------
60:03:3a>
Routing Table (CCU and EUM)
The Routing Table is used by the CCU to determine the routing of IP packets. The routes in
the Routing Table are either entered by the system operator as static routes, or automatically
generated by the CCU. The CCU does not support dynamic routing.
NOTE: With a CCU in Switched Ethernet mode or Through Only mode,
or with an EUM, these routes apply only to packets originated by
the EUM or CCU application. Additional routes can only be added
to a CCU in Routed mode.
The Routing Table contains the following three routes:
Table Entry Description
Port The number of the port which is to be filtered.
Filter
For each port listed, the CCU or EUM can be set to filter UDP, TCP,
or both UDP and TCP packets.